1. Download Jetson Nano Developer Kit SD Card Image Version JP 4.4 DP
2. Flash SD Image file to SD Card using balenaEtcher
3. Insert SD Card to Jetson Nano and power-on
4. Complete first boot configuration
5. Change Time format to English

$sudo update-locale LC_TIME=en_US.UTF-8

6. Update Installed Package

$ sudo apt update
$ sudo apt upgrade

7. Enable SPI using new Jetson-IO utility

$ sudo /opt/nvidia/jetson-io/jetson-io.py

8. Save and reboot
9. Done

Reference: SPI on Jetson – Using Jetson-IO

教學影片中所需相關檔案下載點:

1. ARM DesignStart FPGA
2. Vivado Board File Digilent ARTY-A7 FPGA
3. Micron SPI Flash Simulation Model
4. Cypress Memory Verilog Model

Arm Cortex-M DesignStart FPGA 教學影片:

1. STEP 1 Connect the board and test
   

STEP 2 Prepare Vivado for Cortex-M development

STEP3 Modify the Cortex-M design

STEP 4 Compile software and build new bitstream

STEP 5 Prepare for debug with DAPLink adaptor

如果過程中出現錯誤，請參考以下連結:

1. ‘xilinx.com:ip:axi_bram_ctrl:4.0’ does not support the current part ‘xc7a35ticsg324-1L’

$ sudo vi /etc/modprobe.d/i2c.conf
options i2c_bcm2708 baudrate=400000

then reboot…

$ vim ~/.vimrc
set tabstop=4
set shiftwidth=4
set expandtab

江宜樺：因為台北市、新北市及基隆市都在核四廠的法定疏散避難圈（核電廠緊急應變計劃區）8 公里範圍內，宜蘭縣在避難圈外，還沒有邀請，“與政黨屬性無關”。

太扯了！國家最高行政機關卻在耍寶….

10月1日上班時，我以為我的信用卡遺失
（事實上沒有，只是掉在家裡某個地方）
我當下立刻打電話到花旗銀行掛失，

網路買的維修包，自己 diy